Deutsch Terminal Removal; Figure 3-16 Locking Terminal Into Connector - Detroit Diesel DDEC VI Application And Installation

HARDWARE AND WIRING
6. Push the contact into the grommet until a positive stop is felt. See Figure 3-15. A slight
tug will confirm that it is properly locked into place. See Figure 3-16.
Figure 3-16 Locking Terminal Into Connector

Deutsch Terminal Removal

The appropriate size removal tool should be used when removing cables from connectors. The
proper removal tools are listed in Table 3-92.
Tool Kent-Moore Part Number
J–37451
Removing (12 AWG)
Removing (16-18 AWG) J–34513-1
Table 3-92 Removal Tools for Deutsch Terminals
3-76
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION