Detroit Diesel DDEC VI Application And Installation page 183

4.1.23 STOP ENGINE OVERRIDE
The Stop Engine Override Switch is a momentary normally open switch. When the input is
switched to battery ground, a shutdown override is enabled.
Shutdown Override Switch is a momentary normally open switch.
Installation
This input is wired to the CPC pin 1/15.
This digital input can be configured as listed in Table 4-21.
Parameter
Parameter
Group
1 15 DI
13
Selection
* Not supported in NAFTA
Table 4-21 Diagnostic Request Switch Programming Options
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
DDEC VI ELECTRONIC CONTROLS APPLICATION AND INSTALLATION
Options
0 – Unconfigured
1 – Stop Engine Override Switch
/Diagnostic Request Switch (fault
code flashing)
2 – CC Cancel (FUSO)*
3 – Diagnostic Request Switch
(fault code flashing)
Default
1 – Stop Engine Override Switch
/Diagnostic Request Switch (fault
code flashing)
Access
VEPS or
DRS
4-23