Engine Coolant Level Sensor; Figure 3-28 Engine Coolant Level Sensor Specifications - Detroit Diesel DDEC VI Application And Installation

3.6.4

ENGINE COOLANT LEVEL SENSOR

The ECL Sensor provides an input to the engine protection system and warn the operator if a
low coolant level has been reached.
NOTE:
This sensor is required.
The main component of the ECL Sensor consists of a conductivity probe, which connects to
the CPC (see Figure 3-28).
The probe has an operational temperature range of -40 to 257°F
(-40 to 125°C). Exposure to temperatures beyond this range
may result in unacceptable component life, or degraded sensor
accuracy.
Figure 3-28 Engine Coolant Level Sensor Specifications
The connector listed in Table 3-102 is a Metri-Pack 280 series push-to-seat connector.
Connector
Terminal
Seal
Secondary Lock
Table 3-102 Metri-Pack 280 Connectors and Part Numbers
All information subject to change without notice. (Rev. 01/07)
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
DDEC VI ELECTRONIC CONTROLS APPLICATION AND INSTALLATION
NOTICE:
Coolant Level Sensor Connector
P/N: 15300027
P/N: 12077411
P/N: 12015323
P/N: 15300014
3-97