Detroit Diesel DDEC VI Application And Installation page 248

FEATURES
The Engine Fan Braking option parameter is listed in Table 5-22.
CPC
Parameter Parameter
Group
Eng Brake
19 Enable Auto
Fan
Table 5-22 Optional Fan Braking for Engine Brakes
Engine Brake Option with Service Brake
The Service Brake control of Engine Brake parameter is listed in Table 5-23.
CPC
Parameter Parameter
Group
Service Brk
10 Enable Eng
Brakes
Table 5-23 Service Brake Control of Engine Brake Parameter
Engine Brakes Option with Minimum Vehicle Speed
The minimum vehicle speed for the Engine Brakes option is listed in Table 5-24.
CPC
Parameter Parameter
Group
Min Road Spd Eng
10
Brk Operation
Minimum Vehicle Speed for Engine Brakes Option
Table 5-24
5.6.3 INTERACTION WITH OTHER FEATURES
DDEC VI will respond to requests from other vehicle systems via the J1939 data link to disable or
enable engine brake.
5-36
Description
Provides additional engine braking
by activating the DDEC controlled
fan whenever the engine brakes are
active in high. This function requires
both DDEC engine brake controls and
DDEC fan controls.
Description
0 = Disable
When this function is 1 = Enable automatic engine
enabled, an input from the brake when applied service
service brake is required brake
in order to activate the 2 = Operator selection and
engine brake. service brake for engine brake
activation
Description
The minimum vehicle speed
required before engine
braking will occur.
7SA827 0701 Copyright © 2007 DETROIT DIESEL CORPORATION
Options Default
0 = Disable
0 = Disable
1 = Enable
Options Default
0
Options Default
0-200 km/hr 0 km/hr
All information subject to change without notice. (Rev. 01/07)
Access
VEPS,
DRS, or
DDDL 7.0
Access
VEPS,
DRS, or
DDDL
7.0
Access
DDDL
7.0,
DRS,
VEPS