SERIES 60 DDEC VI TROUBLESHOOTING GUIDE
17.3.3.3
Main Power Shutdown
The main power supply shutdown schematic shows the DDC approved method for main power
switch implementation. See Figure 17-7.
Figure 17-7
Main Power Supply Shutdown
NOTE:
Switches must remain closed for 30 seconds after ignition is off for the MCM and CPC to
write non-volatile data.
NOTE:
It is recommended that both the positive (+) and negative (-) battery leads be
disconnected.
All information subject to change without notice.
17-17
Copyright © 2007 DETROIT DIESEL CORPORATION