Note
No recording of data
The values displayed in the recorder are not recorded and saved, they are only used for
display until the screen form is exited.
6.6.5.4
AOP settings
Control settings
This defines the settings for the control keys in LOCAL mode (see "Operation / Control via
the operator panel / Operation via the operator panel").
Display settings
In this menu, you set the lighting, brightness, and contrast for the display.
Define operation screen
In this menu, you can switch between five operation screens. You can set the parameters to
be displayed.
Figure 6-21
Define operation screen
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
6.6 Control via the operator panel
Operation
299