Device overview
2.3 Configuration
2.3
Configuration
The SINAMICS S150 Converter Cabinet Units are characterized by their compact, modular,
and service-friendly design.
Line and motor-side components as well as additional monitoring devices can be installed in
the converter cabinet units.
A wide range of electrical and mechanical components enable the drive system to be
optimized in line with prevailing requirements.
The cabinet unit comprises up to two cabinet panels with a total width of between 1400 mm
and 2800 mm, depending on the output.
Figure 2-1
Example of a cabinet unit (e.g., 200 HP, 3-phase 460 V AC) (configuration and components shown may vary
by version)
32
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives