Table of Contents
Advertisement
3. Assigning the IP address and the name
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
4. Select online operation in STARTER.
Set the IP address in Windows XP
On the desktop, right-click on "Network environment" -> Properties -> double-click on
Network card and choose -> Properties -> Internet Protocol (TCP/IP) -> Properties ->
Enter the freely-assignable addresses.
Figure 6-37
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
Properties of the Internet Protocol (TCP/IP)
6.9 Communication via PROFINET IO
Operation
363
Advertisement
Table of Contents
