Table of Contents
Advertisement
3.3.3
Installation
3.3.3.1
Lifting the cabinet off the transport pallet
Lifting the cabinet off the transport pallet
The applicable local guidelines regarding the transportation of the cabinet from the transport
palette to the installation location must be observed.
A crane transport assembly (option M90) can also be fitted on the top of the cabinet.
The fixing screws of the transport pallets can be removed without having to lift the cabinet
unit. The positions of the fixing screws are indicated by red markings on the outside of the
pallets.
Figure 3-6
For cabinet units without base (in the figure on the left), the fixing screws of the transport
pallets must be removed from the underside of the pallet.
For cabinet units with base (in the figure on the right), the fixing screws of the transport pallet
are accessible only after the cover is opened. They can then be loosened and removed
directly from the front.
Failure to observe the weight and the center of gravity
The non-observance of restrictions concerning the weight and the center of gravity can
cause death or severe injury during lifting and transport activities.
• The weight specified on the packaging and the designated center of gravity must always
• This potential hazard must be taken into account particularly once you have unscrewed
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
Lifting from the transport pallet (left: without base; right: with base)
WARNING
be taken into account when the cabinet is lifted and transported.
the cabinet units from the transport pallet.
Mechanical installation
3.3 Installation
49
Advertisement
Table of Contents
