Saving Settings; Saving Settings In The Project; Saving Settings Retentively - Siemens SINAMICS S120 Commissioning Manual

Fundamentals

4.6 Saving settings

4.6 Saving settings
To permanently save the settings, you have the following options:

• Saving settings in the project.

• Saving settings (offline/online) on the memory card of the converter.
4.6.1 Saving settings in the project
Overview
In Startdrive, settings are predominantly made via screen forms. The complete project must be
saved in order that the settings made are permanently active.
Procedure
Proceed as follows to permanently save the settings in the project:
1. Click this toolbar icon
OR
Select the "Project > Save" or "Project > Save as" menu.
As a result, you have permanently saved the settings in your Startdrive project.
4.6.2

Saving settings retentively

Overview
The settings during parameterization are only saved volatile. They are lost when you switch off
the converter.
To save an online or offline configuration retentively, the settings must be saved to the memory
card of the converter.
Requirements
• PG/PC and converter are connected with one another via a LAN cable.
Saving online data
Click the
configuration retentively.
The current project settings are stored retentively on the memory card of the converter.
84
.
icon in the function view of the active Startdrive project to save the online
Commissioning with Startdrive
Commissioning Manual, 06/2020, 6SL3097-5AA10-0BP2