Operation
9.3 Controlling via the AOP30 operator panel
9.3.5.3
AOP settings
Control settings
This defines the settings for the control keys in LOCAL mode (see the section titled
"Operation/Operation via the operator panel") as well as additional settings that are relevant
for drive control.
Display settings
This menu is where you make the lighting, brightness, and contrast settings for the display.
Define operation screen
In this menu, you can switch between five operation screens. You can set the parameters
that are to be displayed.
Figure 9-20
Define operation screen
The figure below shows how the entries are assigned to the screen positions:
Figure 9-21
322
Layout of the entries on the operation screen
Operating Instructions, 1.2012, C98130-A7066-A1-05-7619
SINAMICS DCM DC Converter