Table of Contents
Advertisement
Terminal assignment with the "PROFIdrive" default setting
The "PROFIdrive" default setting uses the following terminal assignment:
Figure 6-10
Control word 1
The bit assignment for control word 1 is described in "Description of the control words and
setpoints".
Status word 1
The bit assignment for status word 1 is described in "Description of the status words and
actual values".
Switching the command source
The command source can be switched using the LOCAL/REMOTE key on the AOP30.
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
Terminal assignment with the "PROFIdrive" default setting
Operation
6.4 Command sources
283
Advertisement
Table of Contents
