Table of Contents
Advertisement
Functions, monitoring and protective functions
9.3 Drive functions
Know-how protection with basic copy protection
The drive unit can only be operated if the associated memory card with the drive unit settings
is inserted into it. After replacing a drive unit, to be able to operate the new one with the
settings of the replaced drive unit without knowing the password, the memory card must be
inserted in the new drive unit.
Know-how protection with extended copy protection
The drive unit can only be operated if the associated memory card with the drive unit settings
is inserted into it. It is not possible to insert and use the memory card in another drive unit
without knowing the password.
Functions, which can be executed when know-how protection is active
The following functions can be executed although know-how protection is active:
● Restoring factory settings
● Saving parameters
● Acknowledging faults
● Displaying faults and alarms
● Displaying the history of faults and alarms
● Reading out the diagnostic buffer
● Switching over to the control panel (complete control panel functionality: Fetch master
control, all buttons and setting parameters)
● Displaying created acceptance documentation
Note
List of the exceptions when know-how protection is activated
A list of the adjustable parameters which, in spite of activated know-how protection, can be
changed, is provided in the List Manual.
The list has the designation "KHP_WRITE_NO_LOCK".
Functions, which cannot be executed when know-how protection is active
The following functions cannot be executed when know-how protection is active:
● Download the drive device settings
● Auto Servo Tuning
● Stationary or rotating measurement of the motor data identification
● Clear fault and alarm buffer
● Generating acceptance documentation for safety functions
566
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives
Advertisement
Table of Contents
