Table of Contents
Advertisement
Commissioning
5.3 Procedure for commissioning with STARTER
11.The SINAMICS drive is displayed as drive object in the project navigator.
12.You can now configure the drive unit (see Chapter "Configuring the drive unit").
Note
Storage location of the IP address
The IP address and device name are stored on the memory card of the Control Unit
(non-volatile).
Parameters
Parameters can also be used to modify and/or display the properties of the Ethernet
interface.
• p8900
• p8901
• p8902
• p8903
• p8904
• p8905
• r8910
• r8911
• r8912
• r8913
• r8914
• r8915
246
IE name of station
IE IP address of station
IE default gateway of station
IE subnet mask of station
IE DHCP mode
IE interface configuration
IE name of station active
IE IP address of station active
IE default gateway of station active
IE subnet mask of station active
IE DHCP mode of station active
IE MAC address of station
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives
Advertisement
Table of Contents
