Table of Contents
Advertisement
Figure 5-28
⇒ In the Encoder name: field, enter a name of your choice.
⇒ Click the Select standard encoder from list radio button and select one of the available
encoders.
● Standard encoders with code numbers 1xxx are provided for selection when encoder
module SMC10 is fitted (option K46).
● Standard encoders with code numbers 2xxx are provided for selection when encoder
module SMC20 is fitted (option K48).
● Standard encoders with code numbers 3xxx are provided for selection when encoder
module SMC30 is fitted (option K50).
⇒ To enter special encoder configurations, click the Enter data radio button and then the
Encoder data button. The following input screen form (in this case an example for the HTL
encoder) is displayed in which you can enter the required data.
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
Entering the encoder data (option K50)
5.3 Procedure for commissioning with STARTER
Commissioning
229
Advertisement
Table of Contents
