Table of Contents
Advertisement
Preface
The individual documentation describes a specific configured cabinet unit and contains the
following:
● Dimension drawing
The dimension drawing documents the dimensions of the ordered cabinet unit.
● Layout diagram
The layout diagram shows the components installed in the ordered cabinet unit along with
the equipment identifiers and location designations.
● Circuit diagram
The circuit diagram shows the electrical components installed in the ordered encoder unit
with the equipment identifiers and location designations, their interconnections, and the
customer interfaces.
● Terminal diagram
The terminal diagram shows all the customer terminals in the ordered cabinet unit and
the associated internal wiring in the cabinet unit. This diagram documents the line-side
target wiring.
● Spare parts list
The spare parts list contains all the available spare parts for the ordered cabinet unit.
● Additional operating instructions
The instructions for supplier components installed in the ordered cabinet unit are included
as original documentation.
Technical support
Technical advice is available at the following address:
● Phone.: 1-800-333-7421 (within USA, toll free)
Tel.: +1(423)262-5710 (outside USA)
● Online request: www.siemens.com/automation/support-request
Customer service, field service, spare parts and repair
● helpline.sii@siemens.com
Tel.: 1-800-241-4453 (within USA, toll free)
Tel.: +1(423)262-5711 (outside USA)
4
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives
Advertisement
Table of Contents
