Table of Contents
Advertisement
Further information about communication via CAN bus
Note
Further information
Detailed and comprehensive instructions and information for the CANopen interface can be
found in the accompanying Function Manual. This manual is available as additional
documentation on the accompanying customer DVD.
4.9.16
Communication Board Ethernet CBE20 (option G33)
Description
Figure 4-32
The CBE20 interface module is used for communication via PROFINET / SINAMICS Link /
Ethernet/IP.
The module is inserted in the option slot of the Control Unit at the factory.
4 Ethernet interfaces are available on the module. Diagnosis of the function mode and
communication are possible via LEDs.
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
Communication Board Ethernet CBE20
Electrical installation
4.9 Additional connections
149
Advertisement
Table of Contents
