Setpoint Sources; Analog Inputs - Siemens SINAMICS S150 NEMA Operating Instructions Manual

Operation

6.5 Setpoint sources

6.5 Setpoint sources
6.5.1

Analog inputs

Description
The customer terminal module features two analog inputs for specifying setpoints via current
or voltage signals.
With the factory setting, analog input 0 (terminal X521:1/2) is used as a current input in the
0 to 20 mA range.
Requirement
The default setting for analog inputs was chosen during commissioning:
• STARTER (p1000):
• AOP30 (p1000):
Signal flow diagram
Figure 6-13
Function diagrams
FP 9566
FP 9568
286
"TM31 terminals"
"2: TM31 terminals
Signal flow diagram: Analog input 0
TM31 – analog input 0 (AI 0)
TM31 – analog input 1 (AI 1)
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives