Table of Contents
Advertisement
Operation
6.12 Communication via MODBUS TCP
6.12.8
Parameters, faults and alarms
Parameters
• p0978
• p2030
• p2040
• r2050[0...19]
• p2051[0...24] CI: IF1 PROFIdrive PZD send word
• r2053[0...24]
• r2054
• p8835
• p8839[0...1]
• p8840
• r8850[0...19]
• p8851[0...24] CI: IF2 PZD send word
• r8853[0...24]
• r8854
• p8920[0...239] PN Name of Station
• p8921[0...3]
• p8922[0...3]
• p8923[0...3
• p8924
• p8925
• p8940[0...239] CBE2x Name of Station
• p8941[0...3]
• p8942[0...3]
• p8943[0...3]
• p8944
• p8945
Faults and alarms
• F01910
• A01925 (F)
• F08501 (N, A) PN/COMM BOARD: Setpoint timeout
• A08526 (F)
• A08555
430
List of drive objects
Fieldbus interface protocol selection
Fieldbus interface monitoring time:
CO: IF1 PROFIdrive PZD receive word
IF1 PROFIdrive diagnostics PZD send word
PROFIBUS status
CBE20 firmware selection
PZD interface hardware assignment
COMM BOARD monitoring time
CO: IF2 PZD receive word
IF2 diagnostics PZD send
COMM BOARD state
PN IP address
PN default gateway
PN Subnet Mask
PN DHCP mode
PN interfaces configuration
CBE2x IP address
CBE2x Default Gateway
CBE2x Subnet Mask
CBE2x DHCP mode
CBE2x interfaces configuration
Fieldbus: Setpoint timeout
Modbus TCP connection interrupted
PN/COMM BOARD: No cyclic connection
Modbus TCP commissioning fault
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives
Advertisement
Table of Contents
