Table of Contents
Advertisement
Commissioning
5.3 Procedure for commissioning with STARTER
Configuring the drive unit
Figure 5-13
⇒ Under Connection voltage, choose the correct voltage. Under Cooling method: choose the
correct cooling type for your drive unit.
⇒ Under Standard:, select "NEMA" to restrict the selection of drive units offered.
Note
Make a pre-selection
In this step, you make a preliminary selection of the enclosed drives. You do not define the
line voltage yet.
⇒ A list is now displayed under Drive unit selection:. Choose the corresponding drive unit
according to type (article no.) (see rating plate).
⇒ Click Next >
212
Configuring the drive unit
Operating Instructions, 12/2018, A5E36652151A
Enclosed Drives
Advertisement
Table of Contents
