Suzuki Baleno Manual page 1723

B-12 TRANSMISSION RANGE SIGNAL CIRCUITS CHECK
(3 A/T VEHICLE ONLY)
STEP
Ignition switch ON and check voltage at each terminal in
PCM coupler under each condition given below.
Selector lever
in "P" range position: 10 – 14 V at "P" range terminal
Selector lever
in "R" range position: 10 – 14 V at "R" range terminal
Selector lever
in "N" range position: 10 – 14 V at "N" range terminal
1
Selector lever
in "D" range position: 10 – 14 V at "D" range terminal
Selector lever
in "2" range position: 10 – 14 V at "2" range terminal
Selector lever
in "L" range position: 10 – 14 V at "L" range terminal
Is check result satisfactory?
ELECTRONIC FUEL INJECTION SYSTEM (G13/G16 ENGINE WITHOUT WU TWC) 6E1-59
ACTION
0 – 1 V at other range terminal
0 – 1 V at other range terminal
0 – 1 V at other range terminal
0 – 1 V at other range terminal
0 – 1 V at other range terminal
0 – 1 V at other range terminal
1. Battery positive voltage
2. Main fuse box
3. Ignition switch
4. "IG" fuse in J/B
5. Transmission range switch
6. PCM
YES
Transmission range D Wire open or short
signal circuits are in D Poor each terminal
good condition.
If wire and connec-
tion are OK, check
transmission range
switch, referring to
Section 7B.
NO
connection