Suzuki Baleno Manual page 1614

1. Drain plug
2. Radiator
1. Air cleaner outlet hose
UNIT REPAIR OVERHAUL
ENGINE ASSEMBLY
REMOVAL
1) Release fuel pressure in fuel feed line by referring to section
6.
2) Disconnect negative cable at battery.
3) Remove engine hood after disconnecting windshield washer
hose.
4) Drain cooling system.
5) Remove radiator with cooling fan. Refer to Section 6B for re-
moval.
6) Remove air cleaner outlet hose according to procedure de-
scribed in this section.
7) Remove air cleaner case by removing its fastening bolts (3
pcs.).
8) Disconnect the following cables.
D Accelerator cable from throttle body.
D Shift and select cable from transmission (M/T).
D Gear select cable from transmission (A/T).
1. Accelerator cable
9) Disconnect the following vacuum hose.
D Brake booster hose from intake manifold.
D Canister purge hoses from EVAP canister.
10) Disconnect fuel feed hose and return hose.
11) Disconnect heater inlet and outlet hoses.
12) Remove EVAP canister (if equipped).
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-75
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown
out under pressure if plug and cap are taken off too
soon.