Suzuki Baleno Manual page 1523

ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-63
9) Adjust clutch pedal free travel, referring to Section 7C.
(2WD with M/T)
Adjust gear select cable and oil pressure control cable,
referring to Section 7B or 7B1. (A/T)
10) Adjust gear shift control lever, referring to Section 7A.
(2WD with M/T)
11) Adjust gear shift control cable, referring to Section 7A1.
(4WD)
12) Refill transmission with gear oil. (A/T fluid for A/T model), refer-
ring to Section 0B.
13) Refill engine with engine oil, referring to Section 0B.
14) Refill cooling system, referring to Section 6B.
15) Adjust A/C compressor and/or P/S pump drive belt, referring
to Section 0B. (if equipped)
16) Check P/S fluid level, referring to Section 3B1. (if equipped)
17) Upon completion of installation, verify that there is no fuel leak-
age, coolant leakage, transmission oil leakage or exhaust gas
leakage at each connection.
18) Adjust accelerator cable play, referring to Section 6E1.
19) Adjust throttle pressure control cable play, referring to Section
7B (3 A/T).