Suzuki Baleno Manual page 1556

3. Exhaust pipe front No.1
stiffener
1. Exhaust No.1 pipe 4. Exhaust pipe front No.2
2. Exhaust pipe rear stiffener stiffener
1. Exhaust lead wire
2. Clamp
3. Exhaust RH mounting
1. Exhaust RH mounting bracket
1. Exhaust manifold
2. Exhaust manifold gasket
1. Exhaust manifold gasket
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-17
7) Remove exhaust pipe front No.1 and No.2 stiffeners.
8) Remove exhaust No.1 pipe.
9) Remove air cleaner case with air cleaner outlet hose.
10) Detach P/S fluid reservoir from body.
11) Disconnect electric lead wire couplers (heated oxygen sensor
and A/C magnet clutch) and release clamps.
12) Support engine with engine support jack and remove engine
RH mounting.
13) Remove engine RH mounting bracket.
14) Remove exhaust manifold and its gasket from cylinder head.
NOTE:
Be careful not to damage fins of radiator.
INSTALLATION
1) Install new gasket to cylinder head.