Suzuki Baleno Manual page 1533

Flywheel
D If ring gear is damaged, cracked or worn, replace flywheel.
D If the surface contacting clutch disc is damaged, or excessively
worn, replace flywheel.
D Check flywheel for face runout with dial gauge. If runout exceeds
its limit, replace flywheel.
Limit on runout: 0.2 mm (0.0078 in.)
Cylinder Block
Distortion of gasketed surface
Using straightedge and thickness gauge, check gasketed surface
for distortion and, if flatness exceeds its limit, correct it.
Flatness
Honing or reboring cylinders
1) When any cylinder needs reboring, all other cylinders must also
be rebored at the same time.
2) Select oversized piston according to amount of cylinder wear.
Engine displace-
ment
3) Using micrometer, measure piston diameter.
1. 15 mm (0.59 in.)
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-73
Item Standard
0.03 mm
(0.0012 in.)
Size
O/S 0.25
1.3 liter 1 3 liter
O/S 0.50
O/S 0.25
1.6 liter 1 6 liter
O/S 0.50
Limit
0.06 mm
(0.0024 in.)
Piston diameter
74.220 – 74.230 mm
(2.9220 – 2.9224 in.)
74.470 – 74.480 mm
(2.9319 – 2.9323 in.)
75.220 – 75.230 mm
(2.9614 – 2.9618 in.)
75.470 – 75.480 mm
(2.9712 – 2.9716 in.)