Suzuki Baleno Manual page 1497

VALVES AND CYLINDER HEAD
1. Drain plug 3. A/T fluid hose
2. Radiator (A/T only)
1. Intake manifold rear stiffener
2. Generator adjust arm reinforcement bolt
3. Right mounting bracket stiffener
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-37
REMOVAL
1) Relieve fuel pressure according to procedure described in
"FUEL PRESSURE RELIEF PROCEDURE" of Section 6.
2) Disconnect negative cable at battery.
3) Drain cooling system.
4) Remove air cleaner outlet hose as previously outlined.
5) Remove intake manifold rear stiffener bolt, generator adjust
arm reinforcement bolt and right mounting bracket stiffener bolt
from intake manifold.
1. Valve cotters
2. Valve spring retainer
3. Valve spring
4. Valve stem seal
5. Valve spring seat
6. Exhaust valve
7. Intake valve