Suzuki Baleno Manual page 1519

1. Drain plug
2. Radiator
3. A / T fluid hose (A / T only)
1. Canister purge
hose (if equipped)
2. Brake booster
hose
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-59
UNIT REPAIR OVERHAUL
ENGINE ASSEMBLY
REMOVAL
1) Release fuel pressure in fuel feed line by referring to Section 6.
2) Disconnect negative cable at battery.
3) Remove engine hood after disconnecting windshield washer
hose.
4) Drain cooling system
WARNING:
To help avoid danger of being burned, do not remove
drain plug and radiator cap while engine and radiator
are still hot. Scalding fluid and steam can be blown out
under pressure if plug and cap are taken off too soon.
5) Remove radiator with cooling fan. Refer to Section 6B.
6) Remove cleaner outlet hose as previously outlined.
7) Remove air cleaner case by removing its fastening bolts.
8) Disconnect the following cables.
D Accelerator cable from throttle body.
D A/T throttle pressure control cable from A/T (3 A/T).
D Clutch cable from transmission (M/T).
D Gear select cable from transmission (A/T).
D Shift and select cable from transmission (4WD).
9) Disconnect the following vacuum hose.
D Brake booster hose from intake manifold.
D Canister purge hose from EVAP canister purge valve.
(if equipped)