Suzuki Baleno Manual page 1470

6A1-10 ENGINE MECHANICAL (G13/G16 TYPE ENGINE)
1. Air cleaner upper case
1. Air cleaner upper case
1. Air cleaner outlet hose
2. Clamp
ON-VEHICLE SERVICE
AIR CLEANER ELEMENT
This air cleaner element is of dry type. Remember that it needs
cleaning according to the following procedure.
REMOVAL
1) Remove air cleaner upper case from lower case after unhook-
ing clamps from upper case.
2. Clamp
2) Remove air cleaner element.
INSPECTION
Check air cleaner element for dirt.
CLEANING
Blow off dust by compressed air from air outlet side of element.
INSTALLATION
1) Install air cleaner element to its lower case.
2) Install air cleaner upper case.
Hook clamps securely.
2. Clamp
AIR CLEANER OUTLET HOSE
REMOVAL
1) Disconnect negative cable at battery.
2) Disconnect breather hose from air cleaner outlet hose.
3) Disconnect IAT sensor wire at coupler.
4) Remove air cleaner outlet hose after loosening its clamps.
3. IAT sensor
4. Breather pipe
INSTALLATION
Reverse removal procedure for installation.