Timing Belt - Suzuki Baleno Manual

6A4-6 ENGINE MECHANICAL (XUD9BSD ENGINE)

TIMING BELT

REMOVAL
1) Drain engine coolant.
2) Remove the following parts.
D Front-right wheel.
D Engine under cover right side.
D Radiator outlet pipe.
D Accessory drive belt.
D Air cleaner suction pipe No.1 and air cleaner case.
D Power steering pump with hoses connected.
3) Support engine.
4) Remove engine mounting right side.
5) Remove timing belt cover.
6) Remove timing belt (1). Refer to "Dismantling the engine" in
"Overhaul checking tuning manual".
INSTALLATION
1) Reverse removal procedure for installation.
Refer to "INSTALLING THE TIMING BELT" in "Overhaul check-
ing tuning manual".
2) Tighten bolts and nuts to specified torque.
Tightening torque:
(a): 10 N·m (1.0 kg-m, 7.5 lb-ft)
(b): 5 N·m (0.5 kg-m, 4.0 lb-ft)
(c): 15 N·m (1.5 kg-m, 11.0 lb-ft)
TURBOCHARGER
REMOVAL
1) Drain transmission oil and engine coolant.
2) Remove the following items.
NOTE:
The inlet and outlet orifices of the turbocharger must be
blanked off.
D Air intake pipe.
D Air outlet hose from turbocharger.
D Exhaust pipe No.1.
D Center shaft. Refer to section 4 of this manual.
D Oil feed pipe and oil return hose from engine.
3) Remove turbocharger from exhaust manifold.
1. Air intake pipe
2. Air outlet hose