Suzuki Baleno Manual page 1485

1. Mounting member
2. Engine front torque bush
3. Engine rear mounting
4. Body
1. Transmission stiffener
2. Transmission 3. Cylinder block
1. Exhaust No. 1 pipe
ENGINE MECHANICAL (G13/G16 TYPE ENGINE) 6A1-25
5) Install mounting member. (2WD only)
Tighten bolts and nut to specified torque.
Tightening Torque
(a): 55 N·m (5.5 kg-m, 40.0 lb-ft)
(b): 45 N·m (4.5 kg-m, 32.5 lb-ft)
6) Remove lifting device. (2WD only)
7) Install transmission stiffener.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
8) Install exhaust No.1 pipe.
Tighten bolts to specified torque.
Tightening Torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
(b): 43 N·m (4.3 kg-m, 31.5 lb-ft)
NOTE:
Use new gasket for exhaust No.1 pipe.
9) Install engine under covers.
10) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in Section 0B.