Suzuki Baleno Manual page 1552

11) Remove EGR pipe.
1. EGR pipe
12) Disconnect coolant pipe from intake manifold.
1. Coolant pipe
13) Remove intake manifold from cylinder head, and then its gas-
1. Intake manifold gasket
2. Intake manifold
INSTALLATION
1) Install new intake manifold gasket to cylinder head.
2) Install intake manifold.
1. Intake manifold gasket
2. Intake manifold
3) Connect coolant pipe to intake manifold.
1. Coolant pipe
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-13
ket.
Tighten bolts and nuts to specified torque.
Tighten Torque
(a): 23 N·m (2.3 kg-m, 17.0 lb-ft)