2) Install oil pump sprocket cover and tighten bolts to specified
1. Oil pump sprocket cover
3) Install oil pan and oil pump strainer.
4) Refill engine with engine oil.
5) Connect negative cable at battery.
6) After completing installation, check oil pressure by running en-
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-27
torque.
Tightening Torque
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
Refer to item "OIL PAN AND OIL PUMP STRAINER" in this sec-
tion.
Refer to item "ENGINE OIL CHANGE" in Section 0B.
gine. Refer to "OIL PRESSURE CHECK" in this section.