Suzuki Baleno Manual page 1562

1. Mounting member
2. Engine front torque bush
3. Engine rear mounting
4. Suspension frame
1. Exhaust No.1 pipe
ENGINE MECHANICAL (J18 TYPE ENGINE) 6A3-23
5) Install mounting member.
Tighten bolts and nuts to specified torque.
Tightening Torque
(a) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
(b) : 45 N·m (4.5 kg-m, 32.5 lb-ft)
6) Remove lifting device.
7) Install exhaust No.1 pipe.
Tighten bolts and nuts to specified torque.
Tightening Torque
(a) : 50 N·m (5.0 kg-m, 36.5 lb-ft)
NOTE:
D Tighten bolts and nuts marked (a) first.
D Use new gasket for exhaust No.1 pipe.
8) Install engine under covers.
9) Install oil level gauge.
10) Refill engine with engine oil by referring to item "ENGINE OIL
CHANGE" in Section 0B.