Suzuki Baleno Manual page 1587

6A3-48 ENGINE MECHANICAL (J18 TYPE ENGINE)
If measured camshaft journal clearance exceeds limit, measure
journal (housing) bore and outside diameter of camshaft journal.
Replace camshaft or cylinder head assembly whichever the differ-
ence from specification is greater.
Item
Camshaft journal
bore dia. (IN & EX)
Camshaft journal
O.D. (IN & EX)
Wear of Hydraulic Valve Lash Adjuster
Check adjuster for pitting, scratches, or damage.
If any malcondition is found, replace.
Measure cylinder head bore and adjuster outside diameter to de-
termine cylinder head-to-adjuster clearance. If clearance exceeds
limit, replace adjuster or cylinder head.
Item
Hydraulic valve
lash adjuster
O.D.
Cylinder head
bore
Cylinder head
to adjuster
clearance
Standard
26.000 – 26.033 mm
(1.0236 – 1.0249 in.)
25.937 – 25.955 mm
(1.0211 – 1.0219 in.)
Standard
30.959 – 30.975 mm
(1.2189 – 1.2195 in.)
31.000 – 31.025 mm
(1.2205 – 1.2215 in.)
0.025 – 0.066 mm
(0.0010 – 0.0026 in.)
Limit
–
–
0.15 mm
(0.0059 in.)