6A3-74 ENGINE MECHANICAL (J18 TYPE ENGINE)
6) Reverse removal procedure for installation, as previously out-
lined.
7) Adjust accelerator cable play.
Refer to Section 6E2.
8) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
9) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in Section 0B.
10) Refill cooling system referring to Section 6B.
11) Connect negative cable at battery.
12) Check ignition timing and adjust as necessary by referring to
Section 6F2.
13) Check to make sure that there is no fuel leakage, water leak-
age, oil leakage and exhaust gas leakage at each connection.