Subaru Legacy 2005 Service Manual page 1002

FUEL INJECTION (FUEL SYSTEMS)
13) Remove the fuel injectors.
14) Remove the bolts which hold fuel injector pipe
RH onto the lower side of intake manifold.
15) Loosen the clamp which holds fuel hose to in-
jector pipe, and then disconnect the fuel hose from
pipe.
16) Remove the fuel injector pipe.
17) Remove the intake manifold (upper) from in-
take manifold (lower).
Intake Manifold
D: ASSEMBLY
1) Install the intake manifold (lower) to intake man-
ifold (upper).
NOTE:
Use a new O-ring.
Tightening torque:
8.3 N
FU-01181
2) Install the fuel injector pipe.
3) Connect both the fuel injector pipes with a fuel
hose and secure them with clamps.
FU-01182
4) Tighten the bolt which secures fuel injector pipe
RH onto the lower side of intake manifold.
Tightening torque:
6.5 N
FU-01183
FU-01184
FU(H4DOTC)-18
⋅
m (0.85 kgf-m, 6.1 ft-lb)
⋅
m (0.66 kgf-m, 4.8 ft-lb)
FU-01184
FU-01183
FU-01182