Subaru Legacy 2005 Service Manual page 1024

FUEL INJECTION (FUEL SYSTEMS)
22.Fuel Tank
A: REMOVAL
WARNING:
• Place "NO FIRE" signs near the working area.
• Be careful not to spill fuel on the floor.
1) Set the vehicle on a lift.
2) Release the fuel
FU(H4DOTC)-39, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
3) Drain fuel from fuel tank.
<Ref. to FU(H4DOTC)-39, DRAINING FUEL,
PROCEDURE, Fuel.>
4) Remove the rear seat.
5) Remove the service hole cover of fuel pump.
(1) Remove the bolts (A).
(2) Push the grommet (B) down and remove
service hole cover.
(A)
(B)
6) Disconnect the connector from fuel pump.
Fuel Tank
pressure. <Ref. to
(A)
FU-01124
FU-01125
FU(H4DOTC)-40
7) Remove the service hole cover of fuel sub level
sensor.
(1) Remove the bolts (A).
(2) Push the grommet (B) down and remove
service hole cover.
(A)
8) Disconnect the connector (A) from fuel sub level
sensor.
9) Disconnect the quick connector of the fuel deliv-
ery (B) and return hose (C). <Ref. to FU(H4DOTC)-
55, REMOVAL, Fuel Delivery, Return and Evapo-
ration Lines.>
(A)
10) Lift-up the vehicle.
11) Remove the rear wheels.
12) Remove the bolts which secure the rear brake
hose installation bracket.
(A)
(B)
FU-01126
(C)
(B)
FU-01127
FU-01128