Table of Contents
Advertisement
2. Throttle Body
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
3) Remove the intercooler. <Ref. to IN(H4DOTC)-
12, REMOVAL, Intercooler.>
4) Disconnect the connector from throttle position
sensor.
5) Disconnect the engine coolant hoses from throt-
tle body.
6) Remove the bolts which install throttle body to
the intake manifold.
Throttle Body
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Always use new O-rings.
Tightening torque:
8 N
IN-00203
FU-01157
FU-01158
FU(H4DOTC)-11
FUEL INJECTION (FUEL SYSTEMS)
⋅
m (0.8 kgf-m, 5.9 ft-lb)
FU-01159
Advertisement
Chapters
Table of Contents
