Table of Contents
Advertisement
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Use a new gasket.
• Ensure the sealing portion is free from fuel or for-
eign particles before installation.
• Tighten the nuts to the specified torque in the or-
der as shown in the figure.
Tightening torque:
⋅
4.4 N
m (0.45 kgf-m, 3.2 ft-lb)
4
6
7
C: INSPECTION
Connect the lead harness to the connector terminal
of fuel pump, and apply the battery power supply to
check whether the pump operates.
WARNING:
• Wipe off fuel completely.
• Keep battery as far apart from fuel pump as
possible.
• Be sure to turn the battery supply to ON and
OFF on the battery side.
• Do not run fuel pump for a long time under
non-load condition.
2
1
4
3
6
5
Fuel Pump
1
8
5
3
2
FU-01141
FU-01330
FU(H4DOTC)-49
FUEL INJECTION (FUEL SYSTEMS)
Advertisement
Chapters
Table of Contents
