Table of Contents
Advertisement
Mass Air Flow and Intake Air Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
9. Mass Air Flow and Intake Air
Temperature Sensor
A: REMOVAL
1) Disconnect the ground cable from battery.
IN-00203
2) Disconnect the connector from mass air flow and
intake air temperature sensor.
3) Remove the mass air flow and intake air temper-
ature sensor.
FU-01187
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
1 N
m (0.1 kgf-m, 0.7 ft-lb)
FU(H4DOTC)-27
Advertisement
Chapters
Table of Contents
