Subaru Legacy 2005 Service Manual page 1000

FUEL INJECTION (FUEL SYSTEMS)
13) Connect the engine coolant hoses to throttle
body.
14) Connect the PCV hose assembly to cylinder
block.
15) Install the coolant filler tank.
<Ref. to CO(H4DOTC)-31, INSTALLATION, Cool-
ant Filler Tank.>
16) Install the intercooler. <Ref. to IN(H4DOTC)-
12, INSTALLATION, Intercooler.>
17) Install the air cleaner case to intake duct.
18) Install the fuse of fuel pump to main fuse box.
19) Connect the ground cable to battery.
20) Lift-up the vehicle.
21) Install the under cover.
22) Fill engine coolant. <Ref. to CO(H4DOTC)-13,
FILLING OF ENGINE COOLANT, REPLACE-
MENT, Engine Coolant.>
23) Install the collector cover.
C: DISASSEMBLY
1) Disconnect the engine ground terminal from
ground stay.
Intake Manifold
2) Remove the solenoid valve bracket assembly
from intake manifold, and disconnect the connector
from the wastegate control solenoid valve, manifold
absolute pressure sensor and purge control sole-
noid valve.
FU-01158
3) Disconnect the evaporation hoses (A) and filter
assembly (B).
FU-01160
4) Disconnect the connector from throttle position
sensor.
5) Remove the throttle body from intake manifold.
FU-01170
FU(H4DOTC)-16
EC-00219
(A)
(B)
FU-01172
FU-01157
FU-01159