Chrysler 1997 Stratus Convertible RHD Service Manual page 1158

HVAC UNIT
24 - 30 HEATING AND AIR CONDITIONING
DISASSEMBLY AND ASSEMBLY (Continued)
The heater a/c unit need not be disassembled to
replace the heater core. Refer to Heater Core replace-
ment in this section.
DISASSEMBLE
(1) Place Heater-A/C unit assembly on workbench
(Fig. 74) and (Fig. 75).
Fig. 74 Heater-A/C Unit
Fig. 75 Mode Motor Linkage
(2) Remove A/C mode motor (Fig. 76).
(3) Remove upper recirculation air inlet housing
(Fig. 77) and (Fig. 78).
(4) From inside of air inlet, depress release tang
on rear inlet door (Fig. 79).
(5) Remove rear Y-cam actuator lever (Fig. 80).
(6) Turn front toggle lever until it lines up with
slots on housing.
MODE MOTOR HVACUNIT RECIRCULATION HOUSING
MODE DEFROST FLOOR FLOOR
DOOR CAM
LEVER
Fig. 78 Recirculation Housing Removal
RECIRCULATION HOUSING
DOOR DOOR
LEVER LEVER LINK
Fig. 76 Mode Motor
Fig. 77 Recirculation Air Inlet
AIR INLET
MODE MOTOR PANEL DOOR LEVER LINK PANEL DOOR LEVER DEFROST PANEL
DOOR DOOR LINK
LEVER
JX