Chrysler 1997 Stratus Convertible RHD Service Manual page 1159

REAR Y-CAM ACTUATOR LEVER RECIRC HOUSING REAR LEVER REAR DOOR ACTUATOR LEVER Y-CAM REAR
JX
DISASSEMBLY AND ASSEMBLY (Continued)
(7) Pull straight up on toggle lever and slide toggle
lever from underneath front actuator lever (Fig. 80).
(8) Remove front toggle lever (Fig. 80).
(9) Remove Y-cam rear lever (Fig. 80).
(10) Unsnap and remove rear air inlet door (Fig. 81).
Fig. 79 Rear Y-Cam Release
Fig. 80 Rear Y-Cam Actuator
Fig. 81 Rear Air Inlet Door
FRONT TOGGLE LEVER Y-CAM ACTUATOR FLAT BLADE PRY TOOL LEVER AIR INLET REAR DOOR FRONT TOGGLE ACTUATOR FRONT
BLOWER MOTOR
REAR LEVER LEVER LEVER
HEATING AND AIR CONDITIONING
(11) Front air inlet door and lever is serviced with
recirculation housing.
(12) Remove blower motor wiring at resistor (Fig. 82).
(13) Remove blower motor (Fig. 83).
(14) Using a flat blade pry tool, Pull up on tab at
evaporator probe cover (Fig. 84). Turn evaporator
probe cover clockwise 90°.
(15) Remove evaporator probe cover. Pull evapora-
tor needle from evaporator (Fig. 85).
BLOWER MOTOR WIRING
Fig. 82 Blower Motor Wiring
Fig. 83 Blower Motor
24 - 31