Chrysler 1997 Stratus Convertible RHD Service Manual page 1124

NOTE: Forward/Rearward and Up/Down adjustment are to be MEASUREMENT LOCATIONS FORWARD/REARWARD made at the same time. AND THEIR VALUES ADJUSTMENT BOLT FORWARD UPSTOP CONTACT BOLT ADJUSTMENT SECTION A-A SECTION B-B SEQUENCE UP/DOWN IN/OUT
23 - 54 BODY
ADJUSTMENTS (Continued)
Fig. 78 Forward Up–Stop Adjustment
TOP OF GLASS—INBOARD/OUTBOARD
ADJUSTMENTS
(1) Remove door trim panel.
(2) Remove water shield as necessary to gain
access to adjusters.
(3) Using a suitable wrench, loosen the lower jack-
screw jam-nuts (Fig. 80).
UPSTOP ADJUSTMENT NUT
ADJUSTMENT SPECIFICATIONS
Fig. 77
strip retainer at point to be adjusted.
screws to achieve the proper gap between the door
glass weatherstrip retainer strip (Fig. 77).
REAR UPSTOP
Fig. 79 Rear Up–Stop Adjustment
(4) Remove weatherstrip from side rail weather-
(5) Close door and raise glass.
(6) Using a suitable allen-wrench, rotate jack-
JX