Ip Dhcp Snooping - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.0)
9.4.(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.8.1.0
Example
Dell(conf)#ip dhcp relay information-option vpn

ip dhcp snooping

Enable DHCP snooping globally.
C9000 Series
Syntax
[no] ip dhcp snooping
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.2.(0.0)
8.3.11.1
8.3.1.0
8.2.1.0
Description
Introduced on the C9010.
Introduced on the S6000-ON.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on C-Series and S-Series.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4810 and S4820T.
Introduced on the Z9000.
Introduced on the E-Series.
Introduced on the C-Series and S-Series on Layer 2 interfaces.
Dynamic Host Configuration Protocol (DHCP) 828