Distribute-List Out - Dell C9000 Series Reference Manual

Version
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.1

distribute-list out

To restrict certain routes destined for the local routing table after the SPF calculation, apply a filter.
C9000 Series
Syntax
distribute-list prefix-list-name out [bgp | connected | isis | rip
| static]
To remove a filter, use the no distribute-list prefix-list-name out [bgp |
connected | isis | rip | static] command.
Parameters
prefix-list-name
bgp
connected
isis
rip
Description
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the name of a configured prefix list.
(OPTIONAL) Enter the keyword bgp to specify that BGP routes
are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
(OPTIONAL) Enter the keyword connected to specify that
connected routes are distributed.
(OPTIONAL) Enter the keyword isis to specify that IS-IS routes
are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
(OPTIONAL) Enter the keyword rip to specify that RIP routes
are distributed.
NOTE: BGP and ISIS routes are not available on the C-
Series. BGP, ISIS, and RIP routes are not available on the
S-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1498