Show Redundancy - Dell C9000 Series Reference Manual

show redundancy

Display the current redundancy configuration.
C9000 Series
Syntax
show redundancy pe pe-id
From a PE console, use show redundancy to view the current high availability (HA)
status for a specified port extender unit.
Parameters
pe pe-id
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.5.1.0
7.6.1.0
Usage Information To modify your results, use the show redundancy [pipe] command, as follows:
Enter the keyword pe and the port extender ID to display the
current redundancy configuration of the specified port extender
unit. Range is from 0 to 255
• EXEC
• EXEC Privilege
Description
Introduced on the C9010 and C1048P.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
• except — show only text that doesn not match a pattern.
• find — search for the first occurrence of a pattern.
High Availability (HA) 915