Ipv4 Pim-Source Specific Mode Commands; Ip Pim Ssm-Range - Dell C9000 Series Reference Manual

IPv4 PIM-Source Specific Mode
Commands
The following IPv4 PIM-source specific mode (PIM-SSM) commands are supported:
•

ip pim ssm-range

• show ip pim ssm-range
ip pim ssm-range
Specify the SSM group range using an access list.
C9000 Series
Syntax
ip pim ssm-range {access_list_name}
Parameters
access_list_name
Defaults Default SSM range is 232/8 and ff3x/32
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.7(0.1)
9.7(0.0)
9.7(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.1
Enter the name of the access list.
Description
Introduced on the C9010.
Introduced on the S3048-ON and S4048-ON
Introduced on the S6000-ON. Added support for VRF on S6000,
S4810, S4820T, Z9000, Z9500, and S6000–ON.
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
PIM-Source Specific Mode (PIM-SSM) 1667