Power Inline Suspend Pe - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information The power inline restore pe command enables or restores the temporarily
suspended PoE power supply to all the ports on a port extender unit.
Example
Dell#power inline restore pe 1 stack-unit 2

power inline suspend pe

Disable PoE power supply to all the ports in a port extender unit temporarily.
C9000 Series
Syntax
power inline suspend pe pe-id stack-unit unit number
Parameters
pe pe-id
stack-unit unit
number
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Usage Information The power inline suspend pe command temporarily disables PoE power supply to
all the ports in a port extender (PE) unit. You can use the power inline restore pe
command to restore or enable the PoE power supply to the PE unit.
Example
Dell#power inline suspend pe 1 stack-unit 2
% Error: StackUnit 2 of PE 1 not provisioned/connected
Description
Introduced on the C9010.
Enter the keyword pe and the port extender ID. Range is 0–255.
Enter the keyword stack-unit and the stack unit number.
Range is 0–7.
Description
Introduced on the C9010.
Port Extenders (PE) 1757