Dell C9000 Series Reference Manual page 1658

packet [in | out]
register
state
timer [assert |
hello | joinprune |
register]
Defaults Disabled.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.12.0
8.1.1.0
7.8.1.0
(OPTIONAL) Enter the keyword packet to view PIM packets.
Enter one of the optional parameters:
• in: to view incoming packets
• out: to view outgoing packets
(OPTIONAL) Enter the keyword register to view PIM register
address in dotted decimal format (A.B.C.D).
(OPTIONAL) Enter the keyword state to view PIM state
changes.
(OPTIONAL) Enter the keyword timer to view PIM timers. Enter
one of the optional parameters:
• assert: to view the assertion timer
• hello: to view the PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
PIM-Source Specific Mode (PIM-SSM) 1658